12
Step 8: Standard Ridge & end cap
Dress over hip, cut and bend
to shape at intersections
Optional small ridge
Optional end capping
Apply foam tape to underneath the 25mm
treated timber batten. Using the profile ridge
and hip for position fit timber battens and
screw into place.
8a
Follow instructions 8a and 8b for end capping.
Fix rafter cap over delta ridge profile at verge.
In cases of stretched Victorians and off angles
on ridges, a smaller ridge is available to allow
for angle adjustment. Paint cut edges with
touch-up kit.
8c
Position delta ridge over batten and fix
side on. Use touch up kit provided to hide
screw heads.
8b
3-way capping
5-way capping
Rafter cap
